2000-50CM - Dwyer Australia Sales

BRAND	Dwyer
Product	2000-50CM
Description	differential pressure gauge
Internal code	IMP3701869
Weight	0.15
Technical specification	Service Air and non-combustible, compatible gases May be used with hydrogen Pressures must be less than 35 psi Housing Die cast aluminum case and bezel, with acrylic cover Exterior finish is coated gray to withstand 168 hour salt spray corrosion test Accuracy ±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100 PA, -125 PA, -10 MM ±4% (-HA ±2%) on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C) Pressure Limits -20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar) MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar) Enclosure Rating IP67 Overpressure Relief plug opens at approximately 25 psig (1.72 bar), standard gages only Temperature Limits 20 to 140°F (-6.67 to 60°C) -20°F (-28°C) with low temperature option Mounting Orientation Diaphragm in vertical position Process Connections ⅛" emale NPT duplicate high and low pressure taps - one pair side and one pair back Dimensions 4" (101.6 mm) diameter dial face

Please Contact Us to Order to offer competitive prices and delivery time for Dwyer - 2000-50CM differential pressure gauge number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Australia Industrial products Market.

WE SELL ONLY NEW AND ORIGINAL PRODUCTS!

Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.