| BRAND | Hioki |
| Product | CM4371 |
| Description | AC/DC CLAMP METER |
| Internal code | IMP796470 |
| Weight | 1 |
| Technical specification | DC Current range 20.00 A/600.0 A, Basic accuracy: ±1.3% rdg. ±0.08 A (20 A range) AC Current range 20.00 A/600.0 A (10 Hz to 1 kHz, True RMS), Basic accuracy: 45-66 Hz: ±1.3% rdg. ±0.08 A (at 20 A) Crest factor 20.00 A range: 7.5 600.0 A range: 3 or less DC+AC Current range 20.00 A/600.0 A (10 Hz to 1 kHz, True RMS), Basic accuracy DC, 45-66 Hz: ±1.3% rdg. ±0.13 A (at 20 A) DC Voltage range 600.0 ｍV to 1000 V (When using P2000: 600.0 V to 2000 V) AC Voltage range 6.000 V to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS), Basic accuracy 45 - 66 Hz: ±0.9% rdg. ±0.003 V (at 6 V) DC+AC Voltage range 6.000 V to 1000 V, 4 ranges, Basic accuracy DC, 45 - 66 Hz: ±1.0% rdg. ±0.013 V (at 6 V) Resistance range 600.0 Ω to 6.000 MΩ, 5 ranges, Basic accuracy: ±0.7% rdg. ±0.5 Ω (at 600 Ω) Capacitance range 1.000 μF to 1000 μF, 4 ranges, Basic accuracy: ±1.9% rdg. ±0.005 μF (at 1 μF) Frequency range 9.999 Hz to 999.9 Hz, 3 ranges, Basic accuracy: ±0.1% rdg. ±0.003 Hz (at 9.999 Hz) Temperature (K) -40.0 to 400.0 ˚C, add temperature probe accuracy to basic accuracy of ±0.5% rdg. ±3.0 ˚C Voltage detection Hi: 40 V to 600 V AC, Lo: 80 V to 600 V AC, 50/60 Hz Harmonic levels [With Z3210 installed] Voltage/Current harmonic levels up to 30th, Content factor, Total harmonic distortion ratio *Harmonics can be displayed with our free app GENNECT Cross. Other functions DC power, Continuity check, Diode check, Automatic AC/DC detection, Pass/fail judgement function of DC A and DC V, Max/Min/Average/PEAK MAX/ PEAK MIN value display, Low-pass filter function, Display value hold, Auto hold, Back light, Auto-power save, Buzzer sounds, Zero-adjustment Dustproof, waterproof IP54 (While in storage, or when measuring the current an insulated conductor. Do not use when wet.) Power supply LR03 Alkaline battery ×2 Continuous use: 40 hr (without Z3210 installed), 20 hr. (with Z3210 installed and using wireless communications) Other conditions: 10 A AC measurement, backlight off, 23°C reference value Core jaw diameter φ33 mm (1.30 in), Jaw dimension: 69 mm (2.72 in) W× 14 mm (0.55 in) D |
Please Contact Us to Order to offer competitive prices and delivery time for Hioki - CM4371 AC/DC CLAMP METER number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Australia Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
RS232 Interface Plate Plug-in for 3522_SOT 3S12-SO Attention! There is only 1 slot available. simultaneous operation with 95tB_01 (cPlB) iGicIT mdotich (documentation is available in English only)
PC Card 1GB
PC Card 2GB
Hioki AC/DC Current Sensor
Hioki 3532-50 Benchtop LCR Meter speed up to 5msec and 42Hz to 5MHz frequency range
Hioki 9234 Recording Paper For MR8880-20 8807 / 8808 / 8420s etc. (10rolls)
Hioki 9320-01 Logic Probe For 8807 / 8808 / 8847 / 8855 / 8860s / 8870
adapter
Hioki 9447 Battery Pack For 8807 / 8808s / 8420s
Hioki MR8880-20 Memory Hicorder
Hioki MR9000 Printer Unit For MR8880-20
Voltage Detector (multiple of 12)
Card HiTester Digital Multimet
AC/DC Clamp On Hi-Tester (TRMS) 1000A
Mega ohm test
Digital High Tester
Earth HiTester, 2 or 3 wire Measurements
3 Phase Power Analyzer
Digital Card Multi Meter
5kV Insulation Tester/Megohmmeter
High Voltage Insulation HiTester
LCR HiTester, Fourteen parameters, 42 Hz to 5 MHz
Battery HiTester
16ch Scan Unit TC/DC Volts (8860/61)
Test Fixture (Direct Connection Type)
