BRAND | Westinghouse |
Product | E0152 |
Description | MOTOR |
Internal code | IMP3686737 |
Weight | 156.489 |
Technical specification | OUTPUT 15 HP 11 kW 3 phase Flevel 50Hz 2935r/min 190/380V 40/20A Output: 15 HP Speed: 3600 RPM Voltage: 208-230/460 Volts @ 60 Hz Frame: 254T Full Load Efficiency: 92.4% Full Load Power Factor: 91.5% Full Load Amperage: 16.6A Enclosure: Totally Enclosed Fan Cooled (IP55) Service Factor: 1.15 (Continuous); 1.0 @ 50 Hz CSA Certified for Class I Div. 2 Groups B C D - Temp Code T3 Maximum CSA Certified for Class II Div. 2 Groups F & G - Temp Code T3 Maximum (Frame 444T and Above) Insulation: Class F Temperature Rise: Class B NEMA Design B Torques as a Minimum; Various Ratings also Meet Design C Construction: Cast Iron Frame End Brackets & Fan Cover and Main Conduit Box(9) Grounding Terminal: Inside Main Conduit Box Conduit Box: Oversized Main Rotatable in 90 Degree Increments - F1 Mounted Ambient Temperature: Designed for 40°C Elevation: Designed for 3300 ft. Rotation: Bi-Directional; (Except 2 Pole "Hybrid" and F# 5000 and Larger Ratings are Counter-Clockwise facing the DE) Shaft: 1045 Carbon Steel Rotor Construction: Aluminum Die Cast Squirrel Cage for F# 140T - 449T Rotor Construction: Copper/Copper Alloy for F# 5000 and Larger(10) Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat Paint Color: Light Gray - Munsell N5.0 Bearings: Double Shielded Pre-Packed with MULTEMP SRL for F# 140T - 280T (Non-regreasable) Bearings: High Quality Ball (or Roller) Regreasable with Mobil Polyrex™ EM Grease for F# 280TS and Larger Automatic Grease Discharge Fittings on Regreasable Models Labyrinth Type Metal Flinger on Both Ends for F# 280TS and Larger Cast Iron Inner and Outer Bearing Caps for F#280TS and Larger Nameplate: Stainless Steel Suitable for Inverter Duty (PWM - Pulse Width Modulation) per NEMA MG-1 Part 30(5 / 6) Inverter Duty Speed Range: 20:1 Variable Torque / 10:1 Constant Torque (350 HP and Larger are 3:1 Constant Torque) 9 Leads for 5 HP and Smaller 12 Leads for 7.5 HP to 125 HP 6 Leads for 150 HP and Larger Motors are U.L. Recognized CSA Approved and CE Marked Dual Drilled Feet Available on Most Ratings - Longer Frames (i.e. 145T Drilled also for 143T) Insulated Non-Drive End Bearing on 2-Pole Motors 600 HP and Larger Rubber Dust Flinger on Drive-End for F# 140T - 280T Motors 7.5 HP & up are Suitable for Wye/Delta Starting. Motor service factor is 1.0 when operated on a VFD. Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1. Catalog# EP3502 & EP3504 are "Hybrid" ratings; Not CSA Certified (Self-Certify Only) for hazardous locations and not dual drilled Catalog# EP3006 also not CSA Certified for Hazardous Locations (Self-Certify Only). (9) F# 5000 and with Larger with Pressed Steel Plate Main Conduit Box. F# 5007 - 5011 8 Pole Ratings are Aluminum Die Cast Squirrel Cage Rotor Construction. |
Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for Westinghouse - E0152 MOTOR number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Australia Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Vacuum Ciscuit Breaker
STEPPER MOTOR,27V 7W CCW
UNIVERSAL POLE/COIL ASY
Proyector Led
Proyector Led
LUMINARIA ALUMBRADO PÚBLICO
Signal Ext. Board
Speed sensor
MOTOR,ELECT,INDUCTN,SQRL CAGE
Capacitor
SPEED MONITOR
3 Watt Cree Alumnium Flashlight
Analog input template
DO card (including 16 relays)
Westinghouse DO card prefabricated cable 10 m
Digital input template
Digital output template
Digital output template
Sealing set for cylinder
AUXILIARY CONTACT